1 sy10e157 sy100e157 micrel, inc. m9999-032006 hbwhelp@micrel.com or (408) 955-1690 description features individual select controls extended 100e v ee range of ?.2v to ?.5v 550ps max. d to output 800ps max. sel to output internal 75k ? input pull-down resistors fully compatible with industry standard 10kh, 100k ecl levels available in 28-pin plcc package the sy10/100e157 contain four 2:1 multiplexers with differential outputs. the output data are controlled by the individual select (sel) inputs. the individual select control makes the devices well suited for random logic designs. quad 2:1 multiplexer sy10e157 sy100e157 block diagram pin function d 0a ?d 3a input data a d 0b ?d 3b input data b sel 0 ?sel 3 select inputs q 0 ?q 3 true outputs q 0 ?q 3 inverted outputs v cco v cc to output pin names rev.: g amendment: /0 issue date: march 2006
2 sy10e157 sy100e157 micrel, inc. m9999-032006 hbwhelp@micrel.com or (408) 955-1690 package/ordering information ordering information (1) package operating package lead part number type range marking finish sy10e157ji j28-1 industrial sy10e157ji sn-pb sy10e157jitr (2) j28-1 industrial sy10e157ji sn-pb sy100e157ji j28-1 industrial sy100e157ji sn-pb sy100e157jitr (2) j28-1 industrial sy100e157ji sn-pb sy10e157jc j28-1 commercial sy10e157jc sn-pb sy10e157jctr (2) j28-1 commercial sy10e157jc sn-pb sy100e157jc j28-1 commercial sy100e157jc sn-pb sy100e157jctr (2) j28-1 commercial sy100e157jc sn-pb sy10e157jy (3) j28-1 industrial sy10e157jy with matte-sn pb-free bar-line indicator sy10e157jytr (2, 3) j28-1 industrial sy10e157jy with matte-sn pb-free bar-line indicator sy100e157jy (3) j28-1 industrial sy100e157jy with matte-sn pb-free bar-line indicator SY100E157JYTR (2, 3) j28-1 industrial sy100e157jy with matte-sn pb-free bar-line indicator notes: 1. contact factory for die availability. dice are guaranteed at t a = 25 c, dc electricals only. 2. tape and reel. 3. pb-free package is recommended for new designs. 28-pin plcc (j28-1)
3 sy10e157 sy100e157 micrel, inc. m9999-032006 hbwhelp@micrel.com or (408) 955-1690 v ee = v ee (min.) to v ee (max.); v cc = v cco = gnd t a = 40 ct a = 0 ct a = +25 ct a = +85 c symbol parameter min. typ. max. min. typ. max. min. typ. max. min. typ. max. unit i ih input high current a d 200 200 200 200 sel 150 150 150 150 i ee power supply current ma 10e 32 38 32 38 32 38 32 38 100e 32 38 32 38 32 38 37 44 truth table sel data ha lb dc electrical characteristics (1) notes: 1. within-device skew is defined as identical transitions on similar paths through a device. 2. specification for packaged product only. v ee = v ee (min.) to v ee (max.); v cc = v cco = gnd t a = ?0 ct a = 0 ct a = +25 ct a = +85 c symbol parameter min. typ. max. min. typ. max. min. typ. max. min. typ. max. unit t pd propagation delay to ps d 220 380 550 220 380 550 220 380 550 220 380 550 sel 425 600 800 425 600 800 425 600 800 425 600 800 t skew within-device skew (1) ?0 70 ?0 ?0 ps t r rise/fall time 275 400 650 275 400 650 275 400 650 275 400 650 ps t f 20% to 80% ac electrical characteristics (2) note: 1. specification for packaged product only.
4 sy10e157 sy100e157 micrel, inc. m9999-032006 hbwhelp@micrel.com or (408) 955-1690 28-pin plcc (j28-1) rev. 03 micrel, inc. 2180 fortune drive san jose, ca 95131 usa tel + 1 (408) 944-0800 fax + 1 (408) 474-1000 web http://www.micrel.com the information furnished by micrel in this data sheet is believed to be accurate and reliable. however, no responsibility is a ssumed by micrel for its use. micrel reserves the right to change circuitry and specifications at any time without notification to the customer. micrel products are not designed or authorized for use as components in life support appliances, devices or systems where malfu nction of a product can reasonably be expected to result in personal injury. life support devices or systems are devices or systems that (a) are intend ed for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant inj ury to the user. a purchaser s use or sale of micrel products for use in life support appliances, devices or systems is at purchaser s own risk and purchaser agrees to fully indemnify micrel for any damages resulting from such use or sale. ? 2006 micrel, incorporated.
|
